The wardriving mode configuration overlay (and code to support it) was added to Kismet in
2022-01-git and subsequent releases.
Kismet is already equipped for what most would consider to be wardriving out of the box: With a GPS and one (or more) Wi-Fi cards, Kismet will generate logs suitable for uploading to Wigle or generating your own maps and logs.
Many people however want to run Kismet on what would typically be considered light-weight or even underpowered hardware, which presents challenges in high-density areas (or even lower density areas, depending how under-powered the hardware is).
Kismet provides a configuration overlay file which preconfigures Kismet to optimize it for basic wardriving - this turns off most logging and data retention, disables processing most packets as much as possible, and configures the radios for optimized AP detection. All this comes at the cost of normal functionality - in wardrive mode, Kismet won’t track non-access-point Wi-Fi devices, perform most IDS functionality, log data packets, or retain handshakes. What it will do is function much better for the specific goal of mapping access points and Bluetooth devices.
Kismet can now export directly to Wigle compatible CSV logs. These contain access points and bluetooth devices.
Because Wigle is designed to collect locational information, Kismet will only write to the log when a GPS location is present.
It’s just a config overlay
Remember - wardriving mode is optional, and it’s just a configuration overlay. If the example overlay doesn’t suit your needs, just copy it and change the config!
Using wardriving mode
To use wardriving mode, just launch Kismet with the
--override option (in addition to any other command line options you pass), for instance:
kismet -t some_wardrive --override wardrive
You’ll receive an alert that wardriving mode is active and that logging is greatly reduced, and Kismet will automatically be optimized for pure AP collection.
The wardrive mode overlay enables wiglecsv logging, but leaves other logging types enabled.
This is done by an append config option for
This can easily by changed by copying the wardrive overlay into your
kismet_site.conf file and changing this to:
+ from the
log_types configuration will change the configuration to
replace instead of
Digging into the wardriving mode config
What does wardriving mode change? You can see all the options in the
kismet_wardrive.conf config file:
Raise an alert
Kismet will fire an extra alert to make sure it’s obvious wardriving mode is engaged and not all data will be logged.
load_alert=WARDRIVING:Kismet is in survey/wardriving mode. This turns off tracking non-AP devices and most packet logging.
Enable wiglecsv logging
Kismet can log directly to wiglecsv format; this adds it to whatever other log types are already configured.
# Turn on wiglecsv format log_types+=wiglecsv
Turn off HT Wi-Fi channels
Access point advertisements only happen on the primary Wi-Fi channels; there’s no need to tune to HT20, HT40, VHT80, or VHT160 channels. By eliminating them, we increase the effective channel coverage by hopping through the list faster, meaning we’re less likely to miss APs while in motion.
The options are appended to any 802.11 datasource, local or remote, which doesn’t have an explicit option already set. Specific sources could be left on VHT channels by adding
ht_channels=true,vht_channels=true,default_ht20=true,expand_ht20=trueto those datasource
# Turn off HT20, HT40, and VHT options on wifi datasources (unless they explicitly set them) dot11_datasource_opt=ht_channels,false dot11_datasource_opt=vht_channels,false dot11_datasource_opt=default_ht20,false dot11_datasource_opt=expand_ht20,false
Turn on advanced filtering
Added in 2022-06
Enable a kernel BPF (packet filter language) filter that only passes 802.11 management and EAPOL (WPA handshake) frames. This greatly reduces the number of packets Kismet must process.
Tune 802.11 tracking
Kismet normally tracks all device it sees, keeps fingerprints, optionally keeps IE tags for display, and keeps handshakes. All of this takes memory, so we turn it off.
dot11_ap_only_survey=true dot11_fingerprint_devices=false dot11_keep_ietags=false dot11_keep_eapol=false
Turn off some other logging
The kismetdb log can contain channel usage over time, datasource rates over time, and other info - we don’t care about that for wardriving, turn it off. This saves both disk space and IO time to slower disks, like microsd cards.